Kitchen cabinet installation steps, kitchen cabinet countertop installation precautions

The installation of kitchen cabinets in kitchen decoration is very important, which directly affects the appearance and use. So what are the kitchen cabinet installation steps? What are the precautions for kitchen cabinet countertop installation? Let's find out together.

Kitchen cabinet installation steps
1. Base cabinet
Before installing the floor cabinets, workers should clean the kitchen floor in order to accurately measure the ground level. If the kitchen cabinet and the ground cannot be leveled during installation, the gap between the cabinet doors will not be balanced. The installation workers can use the level ruler to measure the ground and wall to understand the ground level and then adjust the kitchen cabinet level.
2. Hanging cabinet
After the base cabinet is installed, the wall cabinet can be installed. When installing the wall cabinet, in order to ensure the level of the expansion bolts, it is necessary to draw a horizontal line on the wall. Generally, the distance between the horizontal line and the table is 650mm. Consumers can adjust it according to their own height. If there is a situation, propose to the foreman to adjust the distance between the base cabinet and the wall cabinet to facilitate future use.
3. Mesa
After the kitchen is renovated, there will be errors in the size of the original kitchen cabinet plan. In order to reduce the error, some kitchen cabinet manufacturers install the countertops within a period of time after the installation of the base cabinets and wall cabinets, which is convenient for designers to adjust the installation of the base cabinets and wall cabinets. The error of the countertop that may appear in the end ensures the accuracy of the kitchen cabinet installation data.
4. Hardware
Basins, faucets, and baskets are also the highlight of the kitchen cabinet. When installing wall cabinets and countertops, in order to prevent wood chips from falling into the basket rails, the basket should be covered with a covering to avoid affecting future use.
5. Stove appliances
The installation of embedded electrical appliances in the kitchen cabinet only needs to open the power hole on site, but the power hole should not be too small, so as not to be inconvenient to disassemble for maintenance in the future.

The above is the relevant knowledge about the kitchen cabinet installation steps and counter top installation precautions we introduced, hoping to help you.